Kiln Control Options:
Joppa Offers 2 Set Point Controller Kits and 2 Ramp and Soak Controller Kits
Set Point is for setting a specific temperature, like an oven where you turn the temperature to 350 and the oven goes up to 350 and holds that temperature until you change something. Ramp and Soak is where you control the ramp up to a temperature and how long it holds, then how slow or fast you descend to room temperature. So you have the option to go up and hold, then up and hold then up and hold or down and hold, etc., until you reach room temperature. The Auber controllers have 30 places to enter data which can handle a very complicated job.

Set Point Kit #1

For controlling a Kiln using a Solid State Relay

There are five items in this kit:

  1. The Auber Syl-2352, a set point Digital Controller Module
  2. 25 amp SSR (Solid State Relay)
  3. Heat Sink with heat transfer paste
  4. A 36" Type "K" thermocouple
  5. "How to Build Your Own Controller, vers. 3.1"
This is a very versatile, easy to program controller (just set the temperature). We offer you great tech support: call Dudley- 603-456-3569
This is a $205.00 value at a $30.00 savings!
$175.00

SETPOINT

Set Point Kit #2

For controlling a Kiln using a Mechanical Relay

There are four components:

  1. The Auber Syl-2372, a set point Digital Controller Module
  2. T92S11A22-120AC Mechanical Relay
  3. A 36" Type "K" thermocouple
  4. "How to Build Your Own Controller, Version 3.5.2"
This is a very versatile, easy to program controller (just set the temperature). We offer you great tech support: call Dudley- 603-456-3569
This is a $198.00 value at a $23.00 savings!
$175.00

2372_image

Ramp and Soak Controller Kit #1

For controlling a Kiln using a Solid State Relay

There are five items in this kit:

  1. The Auber Syl-2352P, a 30 step Ramp and Soak Digital Controller Module
  2. 25 amp SSR (Solid State Relay)
  3. Heat Sink with heat transfer paste
  4. A 36" Type "K" thermocouple
  5. "How to Build Your Own Controller, Version 3.1"
This is a very versatile, easy to program controller, with a step by step manual to explain all the details. Plus we offer you great tech support: call Dudley- 603-456-3569
This is a $240.00 value at a modest savings:
Kit shown at right...$225.00
with additional SSR and Heat Sink.... $285.00
Wiring Diagram Ideas

MODULE

Ramp and Soak Controller Kit #2

For controlling a kiln using a Mechanical Relay or a Mercury Relay:

There are four items in this kit:

  1. The Auber Syl-2372P, a 30 step Ramp and Soak Digital Controller Module
  2. A 36" Type "K" thermocouple
  3. T92S11A22-120AC Mechanical Relay
  4. "How to Build Your Own Controller, Version 3.5.4"
This is a very versatile, easy to program controller, with a step by step manual to explain all the details. Plus we offer you great tech support: call Dudley- 603-456-3569
This is a $205.00 value at a modest savings:

$185.00


2372P_kit
Back to Controller Choices Element Home Page
valid