| The kit shown below is based on the use of the mulite rod support system. |
| We have an optional system based on the Fused Quartz Tube called an encased element. If you wish to examine this option click here. |
These are items available from Joppa Glassworks, Inc. I hope by offering them that you will have an easier job constructing your new mailbox kiln. Maybe it will make your creative job a little easier. You might also want to toss in to the shopping cart a new A Glassblower's Companion to help you with your kiln building skills. To order these items print this page and fax it along with an order form to Dudley at FAX #1-603-456-2138. Please reference the other pages for the mailbox kiln. |
| 4 | DONUT INSULATORS | $.75 | $3.00 |
| 4 | 18 GA KANTHAL WIRE | .35 | 1.40 |
| 1 | ELEMENT E120-06.25-205 | 25.00 | 25.00 |
| 2 | THROUGH TUBES ELEMENT LEAD TUBES cut at 2" (no charge for cuts) |
6.00 | 12.00 |
| 1 | MARINITE PANEL 4" SQUARE X 1/2" THICK | 5.00 | 5.00 |
| 2 | 15" MULITE RODS X 1/4" DIAMETER | 9.80 | 19.60 |
| 1 | SHIPPING Continental US VIA UPS | 18.00 | 18.00 |
| 1 | TOTAL COST | $84.00 |
Please Note: this is not a complete list of all the items needed to manufacture the Mailbox Kiln. But it is all the items we sell that are appropriate to the cause. You will need a variety of parts. Go to the main Mailbox Kiln Page and start browsing and making your own list of goodies. It goes something like this: Mailbox, Fiberfrax, switch, stuff from Joppa, electric wire, utility warning light, 4" electrical boxes, some metal to make the legs out of, a little bit of 22 ga sheet metal to make the tray and door from, pyrometer (from Sheffield), grounded wire and plug, wire nuts, electric solder, electric tape, and maybe something else... lets see.